NST 1200℃ Dual Zones Sliding PECVD System

NST 1200℃ Dual Zones Sliding PECVD System

1.00

  • Model Number:

    TMAX-1200-1200

  • Compliance:

    CE Certified

  • Warranty:

    Two years limited warranty with lifetime technical support

  • Payment:

    L/C D/A D/P T/T Western Union

  • Delivery Time:

    15 day

  • Description
  • Reviews (0)

Description

1200℃ Dual Zones Sliding PECVD System

TMAX-1200-1200 slip-type two-temperature area PECVD system is composed of TMAX-1200-1200 slip-type two-temperature vacuum tube furnace, quartz vacuum chamber, radio frequency power supply, GX gas supply system, pumping system and vacuum measuring system.

 

Main features:

 

1. The gas in quartz vacuum chamber is changed into ionic state by rf power supply.

 

2. PECVD is lower than normal CVD for chemical vapor deposition

 

3. The stress of the deposited films can be controlled by the frequency of rf power supply

 

4. PECVD has high deposition rate, good uniformity, consistency and stability than normal CVD.

 

5. Widely used in the growth of various films, such as SiOx, SiNx, SiOxNy and amorphous silicon (a-si: H), etc.

 

This slide TL1200-1200 type double temperature PECVD system technique is a rapid heating, cooling temperature PECVD system technique, is in the temperature range of double PECVD system installed on a pair of slide rail, technique available manual sliding system.

Heating and cooling rate of up to 100 ° C/min.

To get the fastest heating, heat the stove to the set temperature beforehand, then move the furnace to the sample position.

To get the fastest cooling, move the stove to the other end after the sample is heated.

Heating and cooling rate under vacuum or inert gas environment can reach 10 ° C/s, is a low cost rapid heating and cooling temperature range of double PECVD system technique.

model NST-1200-1200 – I NST-1200-1200-II NST-1200-1200-III NST-1200-1200-IV
power 3 kw 3 kw 4 kw 4 kw
Tube size 120 (OD) X1800mm Dia 60 (OD) X1800mm Dia 80 (OD) X1800mm Dia 100 (OD) X1800mm Dia
Overall dimensions(LXDXH) 1800 x480x680 1800 x410x610 1800 x410x610 1800 x460x660
The power supply voltage 220 v
Slide rail material 304 stainless steel
Sliding mode stainless steel rolling bearing
Number of phase Single phase
Heating element Import Swedish Canthal A1 resistance wire click into data download
The control mode Using the yu electric program control thermometer (standard)
1. 30 program control temperature intelligent PID adjustment.
2. The heating circuit of the electric furnace can be automatically cut off when it has been protected by warm or broken accidentally. (when the furnace temperature exceeds 1200 degrees or the thermocouple is broken, The ac relay ON the main circuit will be automatically disconnecting, the main circuit is broken, the light ON the panel is out, OFF the light, the limited protective electric furnace.
3. With 485 communication interface (standard and standard for choosing software)
4. It has the function of power failure protection, that is, when the power is off, the program will not start up from the beginning temperature, but the furnace will start to rise when the power is off.
The instrument has the function of temperature self-setting

 

(to replace the imported instrument, we need to pay another fee.)

 

FP93 temperature control table(SHIMADEN)       European instruments

Touchscreen instrument

The temperature control mode PID
Broken even protection and display Yes
Over temperature protection Yes
Over current protection Yes
Control precision + / – 1 ℃
The trigger Phase shift trigger
Electrical appliances Zhejiang chint
Silicon controlled rectifier 106/16e west gate, Germany
The highest temperature Temperature Zone1: 1200 ℃ temperature zone 2:1200 ℃
The rated temperature Temperature Zone1: 1100 ℃ temperature zone 2:1100 ℃
Heating rate The 20 ℃ / Min or less (can modify according to the requirement)
Recommended heating rate 10 ℃ / Min or less
Model of thermocouple Zones 1: temperature range of K type 2: K type
Heating length Zones 1: temperature range of 200 mm. 2:200 mm
Electrical certification CE
Surrounding surface temperature 45 ℃ or less
Rf power supply  

(plasma generator)

Power output range 0-500 w
Maximum reflected power 200 w.
Working frequency Rf: 13.56 MHZ plus or minus 0.005%
Power stability + / – 0.1%
Harmonic component – 50 or less DBC
Rf width 0-600 – mm is adjustable
Matching mode automatic
Cooling mode Air cold
noise The < 50 db
The radio frequency interface 50 Ω N – type
Input power 208-240 – v 50/60 hz
Main parameters of GX gas supply system mass flowmeter
The standard range
Using the proton flow controller 5, 10, 20, 30, 50, 100, 200, 300, 500 SCCM, 1, 2, 3, 5, 10 SLM
(you can choose the range of the range and the type of the gas)
Maximum working pressure 3 mp
The accuracy of Plus or minus 1.5%
The pressure drop < 0.01 mpa < p = “” >
Repeat accuracy Plus or minus 0.2% F.S
Channles: 1, 2, 3, 4, 5, 6, 7, 8 (optional )
Joint type Double cassette stainless steel connector
System work pressure range 0.1 ~ 0.5 MPa
Working temperature 5-45 ℃
Pressure vacuum watch 0.1 ~ 0.15 MPa to 0.01 MPa/case
Static mixing chamber Dia50 X 400 mm
interface Dia6 1/4″
The power supply 220 v
size 600 x600x600
Corrugated pipe KF25X1000mm
The vacuum degree can be reached with this system 10-1 the pa
Vacuum baffle valve KF25
VRD to 8 vacuum pump
model VRD to 8
Limiting partial pressure 5 x10-2 Pa
Inlet exhaust interface KF25
Motor speed 1440 RPM
Extraction rate 2.2 L/S
Motor power 0.4 KW
Perfeer ACP1 Oil-free multi-stage roots pump (plan 2)
Model ACP15
Power supply AC100 ~ 240V 50/60hz
Power 450 w
Exhaust interface KF25
Weight 25 kg
The maximum helium leakage rate is 5 · 10-8 Pa m3 / s
Extreme vacuum degree 0.02 Torr
The extraction rate is 14 m3 / h
model ZDR – 1
power 25 w.
Vacuum degree measurement range 0.1-10 5 Pa
Resistance silicon What ZJ had to 52 t
Sweden (INFICON) Pirani capacitance vacuum meter (optional)
model PCG554
Input voltage 24V 1A DC (equipped with 220V transformer)
Vacuum gauge interface KF16
Digital display Digital display (screen size 20x14mm), whose data display unit is torr
Product size 46mm x 28mm x 126mm (L x W x H)
The weight of the 5 LBS
Detection of gas Various gases can be detected including mixed gases, accurate and repeatable.
Whether the anti-corrosion Corrosion protection
The response time 30 ms or less
Measuring range 3.8 x10-5-1125 Torr.
Molecular pump unit (optional)
Unit input voltage 380 v / 220 v
Corrugated pipe KF40X1000
Vacuum baffle valve KF40
Case size 600 x600x600
Molecular pump model FJ620
Input voltage 380 v
Molecular pump inlet flange DN160
Molecular pump pumping rate L/S (for air) 600
Molecular pump limit pressure (Pa) 6 x 10-7
Cooling system Water cooled
Cooling water pressure (MPa) 0.1 to 0.2
Cooling water temperature < 25 ℃ < p = “” >
The environment temperature 0 ~ 40 ℃
Suggested starting pressure < 100 pa < p = “” >
Engine vacuum pump RVP – 6
power 0.75 KW
voltage 380 v
speed 1450 RPM
Inlet diameter KF25 / KF40
Pump pumping rate (L/S) 6
Ultimate pressure 4 x10-2 pa
German Pfeiffer vacuum pump
voltage 220 v
power 110 w.
Extraction interface KF40
The weight of the 150 kg
Pump speed of the front pump 0.9 m 3 / h
Extraction rate (N2) 33 m/S
Compound vacuum gauge
Compound vacuum gauge model ZDF
The power supply 220 v 55 w
Control precision Plus or minus 1%
Vacuum gauge measurement range 10-5-10 5 Pa

Parts Number
TL1200-1200 Tube furnace 1 set
quartz tube 1
SS Flange 1 set
Stainless steel hook 1
Alumina furnace plug 3
High temperature gloves 1 pair
alumina crucible 1
K thermocouple 1
485 transform interfaces and software(optional) 1 set
Instruction book 1
Flange support 1
Gas supply system 1
VS-0.1air extracting system 1
RF power 1
Ferrule 4个
Bellow 1
Vacuum baffle valve 1
Cyl connector(N stands for number of channels) N
 Valve connector 2
PTFE pipe (N stands for number of channels) N*5

Reviews

There are no reviews yet.


Be the first to review “NST 1200℃ Dual Zones Sliding PECVD System”

You've just added this product to the cart: