NST 1400°C Atmosphere Muffle Furnace
- Model Number:
Size can be customized
Two years limited warranty with lifetime technical support
L/C D/A D/P T/T Western Union
- Delivery Time:
- Reviews (0)
1400°C Atmosphere Muffle Furnace
NST-1400CAtmosphere has many advantages of uniform temperature field,low surface temperature,heating or cooling promptly and so on. it is
the ideal atmosphere muffle furnace for atmosphere protection sintering,atmosphere reducing in Industry, Scientific research institutes, Universities,
which offer Heating element of Sic and double layer housing,phase-shift trigger,controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between
the double walled housing to help the furnace heat or cool promptly. Sealed housing,silicon gel sealed cover,sealed door with silicon gel gasket
and water cooling system,gas float through flow meter,then come out from back side, there are many gas inlets and gas outlets on the furnace
with burning mouth,which can pre-vacuum and pass H2,Ar,N2,O2,CO,NH3 and so on.
Here is the video link for your reference:
1.Temperature controller: Shimaden FP93
40 programmable segments (Shimaden fp93 made in Japan), It can separate into 4,2,1
programs, ie. 4×10 segments.
FP93 have 6 PID controls, different PID are used for low,middle,high temperature for
Over-temperature and over-current protection, shutdown automatically when
thermocouple is broken( it will shut down power when temperature is higher than
1420⁰or thermocouples is broken, “ON” on the board is off and “OFF” is on)
There is Fahrenheit (F) and Celsius (C) for option.
With 485 communication interface: which can stop the furnace automatically.
2.Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut
off power when the cover is opened.
3.Chamber:it is imported from Japan, good performance of heat preservation, high
reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction.
4.Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long
5.Leakage protection function:the furnace is installed with leakage air switch, it will cut off power
Automatically when electricity leak or current exceed rated current.
6.Software controlling system:this furnace can control every parameter directly and observe PV
and SV on the computer by communication interface and software, computer can draw and save
actual heating curve, it is convenient to call these dates at any time.
Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger
8.Gas system:floating flow meter or digital flow meter is for option to control gas Speed.
9.Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5
vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly.
|Heating Rate||≤30℃ /min|
|Recommended Heating Rate||≤15℃ /min|
|Temperature Accuracy||+/- 1°C|
|Temperature Controller||Shimaden fp93 (imported from Japan) with 4 programs and 40 segments
(ie. 4 x 10 segments or 2 x 20 segments)
|Chamber Material||Polycrystalline 98% alumina fibre.Imported from Japan|
|GF Series atmosphere furnace||1pc|
GF11Q-B: Type K
GF11Q: Type K
GF14Q: Type S
GF16Q: Type B
GF17Q: Type B
|Alumina cushion block||1pc|
|Furnace door block||1pc|
|Stainless steel clamp||1pc|
GF11Q-B: Kanthal resistance wire
GF11Q: Kanthal resistance wire
|485 computer interface port||1set|
|Shimaden fp93 temperature controller software and manual||1pc|